Double Cylinder Ironworker

Ironworker

Double Cylinder

IW-60S/SD

Double Cylinder Series

IW60S/SD, IW80S/SD, IW100S/SD, IW125S/SD, IW165SD

The double cylinder "S/SD" series are in the Sunrise tradition of well engineered ironworkers built for high power, quality, and reliability. These ironworkers have two control foot paddles, and separate operations can be safely performed simultaneously. The low pressure setting for tool change provides maximum operation safety. The long punching cylinder stroke and deep throat enable mounting a wide range of special equipment. The large punching base with the "T-slot" fixing provide a solid base for securing the punching tooling, as well as a wide range of optional and custom designed tooling.
 
Specification IW-60S IW-80S IW-100S IW-125S IW-165SD
IW-60SD IW-80SD IW-100SD IW-125SD
Punching    
Punching Pressure 60 ton 80 ton 100 ton 125 ton 165 ton
Punch capacity Φ22 x 20 Φ26 x 22 Φ28 x 26 Φ33 x 27 Φ37 x 32
(Diameter x Thickness) Φ50 x 9 Φ50 x 12 Φ50 x 15 Φ50 x 18 Φ50 x 24
Throat depth (S) 310 310 310 310 -
Throat depth (SD) 510 510 510 510 510
Channel flange punch (height) 180 180 180 180 180
Maximum stroke length 100 100 100 100 100
Cycles / min (20mm stroke)  30 29 28 28 29
Working height up to Die 1010 1050 1044 1069 1050
Angle Shearing    
At 90° shearing 130 x 130 x 13 152 x 152 x 13 152 x 152 x 15 152 x 152 x 18 205 x 205 x 20
At 45° miter shearing 65 x 65 x 6 80 x 80 x 10 80 x 80 x 10 80 x 80 x 10 80 x 80 x 10
Working height 1115 1165 1216 1185 1185
Flat Shearing    
Flat bar shear 350 x 15 460 x 15 610 x 16 610 x 18 760 x 20
(Width x Thickness) 240 x 20 300 x 200 400 x 20 400 x 25 400 x 30
Blade length 360 465 620 620 770
Angle flange trim 100 100 100 100 120
Working height 910 926 954 920 920
Bar Shearing    
Round bar shear Φ40 Φ45 Φ45 Φ50 Φ60
Square bar shear 38 x 38 45 x 45 45 x 45 50 x 50 60 x 60
Channel shear 130* 152* 152* 180* 203*
I beam shear 130* 152* 152* 180* 203*
Working height 1220 1270 1332 1310 1370
Notching    
Rectangular notcher (W x D T) 50.8 x 90 x 9 50.8 x 90 x 12 63.5 x 90 x 12 63.5 x 90 x 13 63.5 x 90 x 16
Vee-notcher (side x side x T) 90 x 90 x 10* 90 x 90 x 12* 105 x 105 x 12* 105 x 105 x 13* 105 x 105 x 16*
Working height 910 926 954 920 920
Special Tooling    
Large Vee notcher (Side x Side x T) 145 x 145 x 8* 145 x 145 x 10* 145 x 145 x 12* 145 x 145 x 13* 145 x 145 x 13*
Single Vee press brake (W x T) 250 x 15* 250 x 15* 250 x 20* 250 x 20* 250 x 20*
Multi Vee press brake (W x T) 500 x 5* 500 x 5* 700 x 5* 700 x 5* 700 x 5*
Angle bending 102 x 6* 102 x 8* 102 x 13* 102 x 13* 102 x 13*
Pipe notching Φ100 Φ100* Φ100* Φ100* Φ100*
Other    
Electric power (HP) 7.5HP 10HP 10HP 15HP 20HP
Net Weight (Apr.) (S) 1880KG 2180KG 2950KG 3340KG -
Net Weight (Apr.) (SD) 2200KG 2650KG 3450KG 3950KG 4950KG
Gross weight (Apr.) (S) 1950KG 2360KG 3180KG 3590KG -
Gross weight (Apr.) (SD) 2380KG 2880KG 3700KG 4220KG 5250KG
Machine dimension (Apr.)
(L x W x H) (S)
1700 x 800 x 1710 1830 x 820 x 1760 2100 x 860 x 1810 2170 x 1030 x 1850 -
Machine dimension (Apr.)
(L x W x H) (SD)
2070 x 800 x 1710 2210 x 820 x 1760 2460 x 860 x 1810 2490 x 1030 x 1850 2710 x 1070 x 2010
Packing dimension (Apr.)
(L x W x H) (S)
1970 x 960 x 1990 2100 x 980 x 2040 2370 x 1020 x 2090 2440 x 1190 x 2130 -
Packing dimension (Apr.)
(L x W x H) (SD)
2340 x 960 x 1990 2480 x 980 x 2040 2730 x 1020 x 2090 2760 x 1190 x 2130 2980 x 1230 x 2290

 

* : Optional tooling
** : On IW-45M the notcher is optional tooling to be installed at the punching station

Note:
Based on low carbon / mild steel material strength of 45kg/mm² tensile.
Design and specifications subject to change without notice.
A 1-hole die holder and a 2 piece gauging table are provided as standard equipment on all single cylinder models.

Click to download e-catalog