NC Hydraulic Swing Beam Shearing Machine

Shearing

NC Hydraulic Swing Beam

HGS 3100-6

NC Hydraulic Swing Beam

NC Hydraulic Swing Beam

NC Hydraulic Swing Beam

  1. The frame is entirely welded with steel plates, and treated to relieve stress by tempering.
  2. Hydraulic drive, return of knife beam is smooth and prompt by accumulator or nitrogen cylinder.
  3. The portable and prompt adjustment of the blades gap and the value of gap are indicated by digital, convenient and fast.
  4. Equipped with lighting-alignment, so as to align when shearing. The stroke of knife beam can be adjusted in stepless mode.
  5. Protection fence to ensure the operation safety.
  6. The display devices of the back gauge value and the shearing times are on the front of the machine.

 

HGD Series Hydraulic Swing Beam Shear

Hydraulic Swing Beam ShearHydraulic Swing Beam Shear

NC hydraulic swing beam

Specification  Unit HGS 2100-6 HGS 2600-6 HGS 3100-6 HGS 4100-6
CUTTING LENGTH [A] mm 2100 2600 3100 4100
CUTTING CAPACITY (42kg/mm²) mm 6 6 6 6
CUTTING CAPACITY (70kg/mm²) mm 4 4 4 4
CUTTING ANGLE (°) 1.2 1.2 1.2 1.2
STROKE PER MINUTE 1/min 28 24 20 15
NUMBER OF HOLD DOWNS amount 11 12 14 18
PRESSURE ton 9 10 12 15
MAIN MOTOR kW 15 15 15 15
BACK GAUGE MOTOR kW 0.75 0.75 0.75 0.75

BACK GAUGE STROKE

mm 1000 1000 1000 1000
OIL CAPACITY lt. 150 150 150 150
BLADE GAP ADJUSTMENT mm 0.05-0.8 0.05-0.8 0.05-0.8 0.05-0.8
BACK GAUGE SPEED mm/s 110 110 110 110
NUMBER OF SHEET SUPPORT ARMS amount 2 2 2 3
TABLE LENGTH [B] mm 2415 2900 3400 4430
MACHINE WIDTH [C] mm 3010 3010 3010 3010
TABLE HEIGHT [D] mm 800 800 800 800
TRANSPORT WIDTH [K] mm 2100 2100 2100 2100
LENGTH [L] mm 3000 3500 4000 5000
WIDTH [E] mm 2410 2410 2410 2410
HEIGHT [H] mm 1640 1640 1640 1650
WEIGHT kg 4250 5000 5500 7800

Click to download e-catalog