PM Series Punching Machine

PM-35T/LT/XT

PM SERIES 

PM25T/LT/XT, PM55T/LT/XT, PM80T/LT/XT,

PM120T/LT/XT, PM160T/LT/XT, PM200T/LT/XT

All Sunrise ironworkers and punching machines now come standard with a low pressure tool alignment mode. The operator can use the JOG mode to run the machine in low pressure and low speed for tool alignment, blade changes and maintenance operations. This will greatly improve operator safety and prevent tool damage in case of mis-alignment. 

  • Sunrise punching machine PM series range from 35 tons to 200 tons and come in 310mm, 510mm, and 760mm throat depths. Punching efficiency and precision are greatly improved with the optional multi-stop table, duplicating table, or the CNC controlled positioning table.
  • Add optional tooling i.e. pipe notcher, press brake, angle shear, bar shear, and channel shear to turn these punching machines into multi-purpose machines.
Specification PM-35T, PM-35LT, PM-35XT PM-55T, PM-55LT, PM-55XT PM-80T, PM-80LT, PM-80XT
Punching    
Punching Pressure 35 ton 55 ton 80 ton
Punch capacity Φ18 x 14 Φ22 x 18 Φ25 x 23
(Diameter x Thickness) Φ50 x 5 Φ50 x 8 Φ50 x 12
Channel flange punch (height) 180 180 180
Throat depth     T: 310 310 310
Throat depth   LT: 510 510  510
Throat depth   XT: 760 760 760
Maximum stroke length 100 100 100
Cycles / min (15mm stroke)  41 28 28
Table Size (WxD)   T: 700 x 500 700 x 500 700 x 500
Table Size (WxD)  LT: 700 x 700 700 x 700 700 x 700
Table Size (WxD)  XT: 700 x 950 700 x 950 700 x 950
Working height up to Die 1050 1050 1050
Optional Tooling    
Largest hole* Φ160 x 2 Φ160 x 3 Φ160 x 4
Single Vee press brake (W x T)* 250 x 12 250 x 15 250 x 15
Multi Vee press brake (W x T)* 500 x 3 500 x 5 500 x 5
Angle bending* 102 x 6 102 x 9 102 x 13
Rectangular notcher (W x D x T)* 63.5 x 90 x 6 63.5 x 90 x 8 63.5 x 90 x 10
Vee notcher (Side x Side x T)* 145 x 145 x 5 145 x 145 x 6 145 x 145 x 10
Pipe notcher (Max diameter)* ?100 ?100 ?100
Flat bar shearing* 175 x 5 175 x 7  175 x 10 
Angle shearing* 75 x 75 x 6 100 x 100 x 7 100 x 100 x 10
Round bar shearing* ?32 ?32 ?32
Square bar shearing* 28 x 28 32 x 32 32 x 32
Channel shearing* 102 x 51 102 x 51 102 x 51
Other    
Electric power (HP) 5HP 5HP 7.5HP
Net Weight (Apr.)     T: 1200KG 1450KG 1780KG
Net Weight (Apr.)    LT: 1500KG 1850KG 2100KG
Net Weight (Apr.)    XT: 1840KG 2200KG 2845KG
Gross weight (Apr.)     T: 1300KG 1620KG 1960KG
Gross weight (Apr.)    LT: 1640KG 2050KG 2300KG
Gross weight (Apr.)    XT: 2000KG 2420KG 3060KG
Machine dimension (Apr.)
(L x W x H)     T:
1090 x 820 x 1770 1160 x 820 x 1960 1280 x 865 x 1980
Machine dimension (Apr.)
(L x W x H)    LT:
1420 x 820 x 1795 1520 x 820 x 1960 1620 x 865 x 1980
Machine dimension (Apr.)
(L x W x H)    XT:
1820 x 820 x 1795 1920 x 820 x 1960 2045 x 865 x 1980
Packing dimension (Apr.)
(L x W x H)     T:
1410 x 970 x 2010 1480 x 970 x 2200 1600 x 1015 x 2220
Packing dimension (Apr.)
(L x W x H)    LT:
1740 x 970 x 2035 1840 x 970 x 2200 1940 x 1015 x 2220
Packing dimension (Apr.)
(L x W x H)    XT:
2140 x 970 x 2055 2240 x 970 x 2200 2365 x 1015 x 2220

 

* : Optional tooling Note:

Based on low carbon / mild steel material strength of 45kg/mm² tensile.
Design and specifications subject to change without notice. 
A 2-hole overhung die holder and a 2 piece gauging table are provided as standard equipment on all punching machines.

Click to download e-catalog