Single Cylinder Ironworker

Ironworker

Single Cylinder

IW-45M

 IW45M
 
The IW-45M has four standard stations, capable of a wide range of applications. The punching station can be converted into a notching station. The IW-45M is heavier and stronger than other competitive machines. This durable and economical model is perfect for small shops with a limited budget.
 
Specification IW-45M IW-50A IW-60H
Punching    
Punching Pressure 45 ton 50 ton 60 ton
Punch capacity Φ22 x 15 Φ20 x 18 Φ28 x 15
(Diameter x Thickness) Φ40 x 8 Φ40 x 9 Φ40 x 11
Throat depth 175 180 220
Maximum stroke length 35 42 55
Cycles / min (15mm stroke)  31 24 29
Working height up to Die 970 840 1000
Angle Shearing    
At 90° shearing 80 x 80 x 8 100 x 100 x 10 100 x 100 x 13
At 45° miter shearing 50 x 50 x 6 65 x 65 x 8 80 x 80 x 8
Working height 1120 850 1236
Flat Shearing    
Flat bar shear 350 x 8 300 x 12 350 x 15
(Width x Thickness) 180 x 12 200 x 18 210 x 20
Blade length 360 310 360
Angle flange trim 75 100 100
Working height 970 1150 1006
Bar Shearing    
Round bar shear Φ25 Φ32 Φ40
Square bar shear 25 x 25 30 x 30 38 x 38
Channel shear - 76* 102*
I beam shear - 76* 102*
Working height 1190 880 1260
Notching    
Rectangular notcher (W x D T) 50.8 x 90 x 7** 50.8 x 90 x 7 50.8 x 90 x 8
Vee-notcher (side x side x T) 90 x 90 x 8** 90 x 90 x 8* 90 x 90 x 10*
Working height - 1150 1006
Special Tooling    
Single Vee press brake (W x T) 160 x 6* 160 x 10* 160 x 8*
Multi Vee press brake (W x T) - 250 x 6* -
Angle bending 65 x 8* 65 x 8* 65 x 10*
Pipe notching - Φ50* -
Other    
Electric power (HP) 5HP 5HP 7.5HP
Net Weight (Apr.) 830KG 1130KG 1500KG
Gross weight (Apr.) 930KG 1250KG 1650KG
Machine dimension (Apr.)
(L x W x H)
1260 x 700 x 1350 1310 x 770 x 1450 1460 x 770 x 1560
Packing dimension (Apr.)
(L x W x H)
1530 x 860 x 1630 1580 x 930 x 1730 1730 x 930 x 1840

 

* : Optional tooling
** : On IW-45M the notcher is optional tooling to be installed at the punching station

Note:
Based on low carbon / mild steel material strength of 45kg/mm² tensile.
Design and specifications subject to change without notice.
A 1-hole die holder and a 2 piece gauging table are provided as standard equipment on all single cylinder models.

Click to download e-catalog