Speed Bend CNC AP, Hydraulic Press Brake

CNC AP 1270-40

CNC Speed Bend
 
  • The precision repeatability performance of these machines is achieved by synchronizing the hydraulic cylinders with the use of advanced proportional valve control,
  • With automatic indexing of the axes at the start of running process, calibration is provided,
  • 4 Data inputs of material thickness, type and length through a user friendly software enables the control to calculate and provide the following
  • Determination of bending power required for each stroke,
  • Graphical display of the unfolding of bending parts,
  • Positioning of the back gauge for each step of the bending program,
  • Determination of the most practical bending sequence
  • Automatic calculation of top beam stroke for bending angle,
  • Adaptation condition of tools and work pieces,
  • Storage of programs with alpha-numerical names and recalling,
  • Programmable bending speeds,
  • Manuel, semi-automatic or automatic working modes.
  • Upper beam tilting for conical bending.
  • Graphical display of potential interferences between material, tools and the machine,

General Specification

  • The precision repeatability performance of these machines is achieved by synchronizing the hydraulic cylinders with the use of advanced proportional valve control,
  • With automatic indexing of the axes at the start of running process, calibration is provided,
  • 4 Data inputs of material thickness, type and length through a user friendly software enables the control to calculate and provide the following.
  • Determination of bending power required for each stroke,
  • Graphical display of the unfolding of bending parts,
  • Positioning of the back gauge for each step of the bending program,
  • Determination of the most practical bending sequence
  • Automatic calculation of top beam stroke for bending angle,
  • Adaptation condition of tools and work pieces,
  • Storage of programs with alpha-numerical names and recalling,
  • Programmable bending speeds,
  • Manuel, semi-automatic or automatic working modes.
  • Upper beam tilting for conical bending.

CNC Speed Bend 2CNC Speed Bend 3

Standard Equipments

  • Mono block, welded steel frame rigid to deflection moment and high tensile with ST44 Al material.
  • Four axis(Yl, Y2, X, R)
  • Standard graphic controllers can be selected from: Cybelec Mod Eva 10 S Color graphics with PC 1200 Delem DA66W 2D with colored graphics Esa Kvara Duemilla 2003
  • Back gauge system with X+R axis driven by AC servo motors on linear bearings
  • Original BOSCH-REXROTH or HOERBIGER servo hydraulic system
  • Mechanical bottom table anti-deflection system
  • Electrical panel with cooling system, designed to meet CE Standards and composed of automation and electrical equipments with SIEMENS brand.
  • Hardened and gnnded standard sectioned top and bottom tods (835 mm). Bottom tool Is in 60×60 dimensions and 4 V-die
  • Amada Promecam type tool holding system with quick release
  • Ergonomic, user friendy, moveable control panel carrying all buttons.
  • Back light guards (category-4)
  • Synchronization of Yl +Y2 axis is provided by linear encoders with 0.01 tolerances.
  • Back gauge fingers move along linear bearings with 0.01 tolerances.
  • Foot pedal conforming to CE regulation. Front arms with T slot and mm/inch rulers, Throat depth 400 mm.

CNC AP

CNC AP 2

Optional Equipments

  • Light Guard (category4).
  • Graphic controllers; Cybelec ModEval 5 3D, Cybelec ModEva 12 3D.Delem 69W 3D
  • Z1+Z2 axis.
  • Xl+X2axis.
  • R1+R2 axis.
  • Motorized Anti-Deflection System which operates automatically with CNC unit according to tonnage applied,
  • Front light guard system, (category-4).
  • Laser protection system for die area, LASER SAFE LZSAKASII Sick V 4000 (Camera based system ) DFS LASER
  • Laser angle measurement system, with data M Cobra Lazer Check System
  • Pneumatic top tool holding system. Hydraulic top and bottom tool holding system, Front arms with CNC control (AP3+AP4 axis). Sliding front arms with bearing rollers. Hydraulic oil coolant. Automatic slide greasing system. Special throat depth (500.600 or 750 mm), Special top and bottom tools
  • Manüel ve CNC Kontrollü motorlu bombeleme sistem.
  • Software options Delem V-Bend. V DXF modul. V-Draw) Delem profile on windows (profile W)
  • SICK C4000 Advanced Finger Protections 14 mm (Easy Programable Sick Soft with PC: Blanking. Reduced Resolution, Cascade working etc) Tandem Application

CNC AP 6100

 

Controllers

Standard Controller ER 90 3D 

ER90

Hardware Features :

  • CPU card : Standard module ETX, Pentium M 1.1 GHz, DDRAM 512 Mbyte
  • Monitor : Colors LCD 17″d3 SVGA, Touch screen
  • Harddisk : 60 Gbyte
  • Serials : COM1:RS232, COM2 : RS422/RS232 USB : 3 channels 2.0
  • Net card : Ethernet 10-100 Base T, with TCP/IP protocol
  • Options : Wireless net

 

CYBELEC MODEVA 10 Controller General Specifications

MODEVA12S

  • 2D DOS-based operating system
  • Wide ergonomic keyboard and integrated track sensor
  • 6 context -sensitive function keys
  • 10″ TFT high resolution color screen
  • Working memory flash 32MB
  • Integrated 3.5″ flooppy disc (optional CD-ROM, LS120 or orthers)
  • Printer output and 2 RS32 port
  • Ethernet R145 and 2 USB port
  • VGA screen output
  • Conversion inch/mm, ton/tons
  • Measurement of speed, stopping time and leakage of the beam
  • Management of CE safety cycles
  • Interactive display of safety utilities and customized messages
  • 16 axes could be configured

 

DELEM 66W 2D  General specifications

DA66W

  • 2D windows operating system
  • Stable, multitasking environment
  •  2D simulation of application before bending process
  • Microsoft networking standard on board
  • Structured program storage (subdirectories)
  • 10.4″ TFT high resolution colour display (640×480 pixels, 16 bits colour) 200MHz microprocessor
  • 32Mb memory capacity
  • 4Mb free product and tools memory
  • 20 digits alpha-numeric drawing number
  • 7 digits program number
  • program repeat max. 9999
  • Step  number, 25 max
  • Step repeat , 99 max
  • Millimeters/inches-USTON/KN
  • External connection of USB
  • keyboard, mouse
  • Error messaging system
  • PLC functionality (sequencer)
  • Machine time + stroke counter
  • Tandem oepration, Delem Modular compatible

Optional controller

  • CYBELEC MODEVA 12 Controller
  • DELEM 69W 3D
  • CYBELEC MODEVA 15S 3D

 

Specification  Unit CNC AP 1270-40 CNC AP 1270-60 CNC AP 2100-40 CNC AP 2100-60
BENDING LENGTH mm 1270 1270 2100 2100
BENDING POWER ton 40 60 40 60
DISTANCE BETWEEN COLUMNS mm 1050 1000 1700 1700
Y RAPID SPEED mm/s 140 200 140 200
Y WORKING SPEED * mm/s 17 17 17 14
Y RETURN SPEED mm/s 170 165 170 165
CROWNING standard - - Motorized Motorized
TRAVEL IN X AXIS mm 500 500 500 500
SPEED OF X AXIS mm/s 500 500 500 500
TRAVEL IN R AXIS mm 250 250 250 250
SPEED OF R AXIS mm/s 350 350 350 350

BACKGAUGE FINGER BLOCKS

amount 2 2 2 2
NUMBER OF SHEET SUPPORT
(Sliding front arms)
amount 2 2 2 2
OIL CAPACITY lt 80 150 80 150
MOTOR POWER kW 5.5 7.5 5.5 7.5
STROKE mm 170 275 170 275
DAYLIGHT mm 387 530 387 530
THROAT DEPTH mm 350 410 350 410
TABLE HEIGHT mm 850 900 850 900
TABLE WIDTH mm 90 90 90 90
LENGTH mm 2150 2250 2900 3250
HEIGHT mm 2300 2750 2300 2750
WIDTH mm 1650 1960 1650 1960
WEIGHT kg 3200 4300 4100 5800
OPTIONAL     
SPEED OF TRAVEL  X1,X2 AXIS mm/s 500 500 500 500
SPEED OF TRAVEL R1,R2 AXIS mm/s 350 350 350 350
SPEED OF TRAVEL Z1,Z2 AXIS mm/s 1000 1000 1000 1000

* Working speed should be max. 10 mm / sec. at CE certified machines according to the EN12622 norm.

Click to download e-catalog